Control Codes 73
IBM Commands (continued)
IBM Command ASCII Decimal
Print One Character from
IBM Set III
(n = 0 to 255) ESC ^ n 27 94 n
Italic Printing On ESC % G 27 37 71
Italic Printing Off ESC % H 27 37 72
Line Feed, Execute
w/ Carriage Return LF 10
n/180" AGM only
(n = 1 to 255) ESC J n 27 74 n
n/216" PPR only
(n = 0 to 255) ESC J n 27 74 n
n/360" (n = 0 to 255) ESC% 4 n 27 37 52 n
Reverse ESC ] 27 93
Auto Line Feed On ESC 5 1 27 53 49
Auto Line Feed Off ESC 5 0 27 53 48
IBM Command ASCII Decimal
Line Spacing
Set Spacing to 1/8" ESC 0 27 48
Set Spacing to 7/72" ESC 1 27 49
Set to n/60": AGM only
(n = 1 to 255) ESC A n 27 65 n
Set to n/72": PPR only
(n = 1 to 255) ESC A n 27 65 n
Activate Spacing Set
by ESC A n ESC 2 27 50
Set to n/180": AGM only
(n= 1 to 255) ESC 3 n 27 51 n
Set to n/216": PPR only
(n= 1 to 255) ESC 3 n 27 51 n
Set to n/360" (n= 1 to 255)ESC % 8 n 27 37 56 n
Overscore On ESC _ 1 27 95 49
Overscore Off ESC _ 0 27 95 48
To Next Page
Loading...
