Oki MICROLINE MX Series - Setting up the Power Paper Stacker

Power Paper Stacker Option
40
Setting Up The Power Paper Stacker
Figure 31. Use the Rear Control Panel to Set Up the Power Stacker
1. Using the rear control panel, press ON LINE/CLEAR to take
the printer offline.
2. Grasp the elevator lift handle, press the elevator disable switch,
and lift the elevator to the top of its travel.
A
A
Stacker Up
Stacker
Down
Paper
Advance
Elevator Disable
Switch
Elevator Lift Handle
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es