|
User’s Guide: English 47
Press LF / Micro Feed Down to decrease the space (move
Top of Form higher). The paper moves down.
Press FF/LOAD / Micro Feed Up to increase the space
(move Top of Form lower). The paper moves up.
32T-FP.eps
QUIETPARKTEAR
FF/LOAD
LF
SEL
SEL
POWER ALARM
MENU
GROUPEXIT
ITEM SET
PRINT
MENU
SHIFT TOF
Micro Feed
Up
Micro Feed
Down
!
The first line prints at the red line of the plastic paper
shield (7) on the printhead.
32T-18.eps
M
4 Keep holding SHIFT and press QUIET/TOF a few times
to set the Top of Form.
5 When Top of Form is at the correct position, release all
keys.
6 Press SEL/MENU to place the printer on line.
!
If you turn the platen knob when the printer is turned
on, you will cause the Top of Form to mis-align. Always
turn the printer off before turning the platen knob!
!
For information on resetting the Top of Form to the
factory default, refer to “Using Your Printer, Top of
Form, Reset Top of Form to Factory Default.”
1
6
4
2
3
5
7
To Next Page
Loading...
Need help?
General
