Oki PACEMARK 4410 - Tractor Change Motor Assy

63
3.3.10Tractor Change Motor Assy
(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Remove Printer Unit. (See 3.3.2)
(3) Remove I/F Board. (See 3.3.6)
(4) Release the cords from Cord Clamp 3 on the cord route.
(5) Unscrew 2 screws 4 and remove Cable Holder 5.
(6) Unscrew the screw 6 and cut the wrapping tie 7.
(7) Remove Micro Switch 8.
(8) Unscrew 2 screws 9 and remove Tractor Change Motor Assy 0.
(9) Remove E rings A and the gear B.
(10)Unscrew 2 screws C and remove Motor D.
(11)For installation, reverse the removal procedure.
B
0
B
D
C
6
8
7
9
9
4
4
5
A
View A
View A