94
5. CLEANIG AND LUBRICATION
5.1 Cleaning
[Caution]
1. Be sure to turn OFF the AC POWER switch before cleaning. Remove the AC Power cord from
the printer.
2. Avoid dust inside the printer mechanism when cleaning.
3. If a lubricated part has been cleaned, be sure to apply lubricating oil to that portion after
cleaning.
(1)Cleaning time
When the equipment time has reached six months or 300 hours, whichever comes first.
(2)Cleaning tools
Dry cloth (soft cloth such as gauze), vacuum cleaner.
(3)Places to be cleaned
Table 5.1 lists the places to be cleaned:
Table 5.1
Place to be cleaned
Main shaft and the vicinity
Paper travel surface
Ribbon guide and the vicinity
Cleaning procedure
Remove paper waste and wipe off
stain, dust, waste. etc.
To Next Page
Loading...
