81
3.3.28Paper Jam Sensor Assy / Bail PE Sensor Assy
(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Unscrew the screw 1 and release the latch, then remove Paper Jam Sensor Assy 2.
(3) Unscrew the screw 3 and release the latch, then remove Bail PE Sensor Assy 4.
(4) Unplug the connector 5 from I/F Board (CN3).
(5) Unscrew 2 screws 6, 7 and remove Paper Jam Sensor 8.
(6) For installation, reverse the removal procedure.
5
6
8
4
3
7
8
2
1
CN3
To Next Page
Loading...
