Oki PACEMARK 4410 - Operator Board (POA Printed Board)

69
3.3.16Operator Board (POA Printed Board)
(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Unplug the connector 2 from Operator Board (POA Printed Board)(CN1) 1.
(3) Unscrew 2 screws 3 and Remove Operator Block Assy 4.
(4) Unplug the connector 8 from Operator Board (POA Printed Board)(CN2) 1.
(5) Unscrew 3 screws 5 and release 3 claws, then remove Operator Board (POA Printed Board)
1 from Operator Block Assy 4.
(6) Unscrew 4 screws 6 and remove LCD Unit 7.
(7) For installation, reverse the removal procedure.
View A
View A
7
6
6
8
2
3
4
3
5
1
Claws