- 57 -
Replacing Consumables
Replacing the Belt Unit and 2nd Transfer Roller
Replacing the Belt Unit and 2nd
Transfer Roller
A new 2nd transfer roller is supplied with the
new belt unit in the same package.
Also, a new waste toner box is mounted inside
the belt unit.
1
If roll paper has been fed through the
printer, press the <UNLOAD> button to
cut the roll paper.
The cut paper will be fed to the supply
side and the feeding side.
2
Grasp the top cover open lever and
open the top cover.
3
Prepare some newspaper or something
to spread on a flat surface on which to
place the print cartridge set, as well as
some paper so it is not exposed to light.
4
Remove the print cartridge set.
5
Place the removed print cartridge, and
cover it with paper so it is not exposed
to light.
6
Prepare some newspaper or something
to spread on a flat surface on which to
place the belt unit.
To Next Page
Loading...
