- 93 -
Printer Maintenance
Cleaning the Cutter Unit
Do not dismantle any parts other than those specified in this procedure. Malfunctions could occur.
Daily maintenance
You should do daily maintenance to keep the machine in good condition as you use it.
Check the condition of the machine when you start and stop using it, and clean it if needed.
Refer to “Printer Maintenance” (P.73) for the procedure and specific places to clean.
Clean the cutter’s blades
Glue on the labels gradually accumulates on the cutter’s blades while cutting roll paper. This causes
problems with cutting and feeding.
Glue is more likely to accumulate on the cutter’s blades when using continuous label paper (because
the part being cut has glue on it). Clean the cutter’s blades periodically to prevent cutting and feeding
problems from occurring.
There is no specified frequency for cleaning, it depends on the type of roll paper being used (liner/glue
materials). If cutting or feeding problems occur, clean the cutter’s blades.
Note
z
Always turn off the power to the printer and remove the power cord from the electric outlet before you start work.
z
Use the specified tools for cleaning work.
z
Do not touch the blades of the cutter with your bare hands. There is a risk of injury.
z
Do not use any solvents other than cleaning fluid (isopropyl alcohol).
z
After cleaning, wipe the machine dry.
z
Wear gloves to clean if you are using cleaning fluid (isopropyl alcohol).
z
Refer to the “Setup Guide” regarding the names and functions of parts.
What to prepare
Prepare the following things to clean the cutter’s blades.
Name How to use Photo
Cleaning swab Use to clean the blades of the cutter.
Cleaning fluid (isopropyl alcohol) Use as a cleanser when cleaning the
blades of the cutter.
Also, use as a cleanser when
cleaning the surface of the rollers.
Tweezers Use to remove scraps of paper
inside the cutter unit and to remove
hardened bits of glue that are stuck
to the blades.
Soft cloth Use to clean the surface of the
rollers.
The cleaning swabs should be the recommended products. Contact your retailer to purchase the
recommended products.
To Next Page
Loading...
