- 65 -
Replacing Consumables
7
Hold the belt unit handles (blue) on the
left and right, and remove the belt unit
at an angle.
Note
z
Do not touch the belt surface or damage the belt.
❶
❷
Note
z
Be careful not to spill waste toner while removing
the belt unit.
z
Be careful to not pinch your hands or fingers
between the handle and the machine while
removing the belt unit.
z
When removing the belt unit, do not tilt it further
than is needed to remove it.
8
Place the removed belt unit levelly.
To Next Page
Loading...
