- 90 -
Printer Maintenance
3
Check if the LED heads are dirty
because toner or something is on them.
4
Lightly wipe the lenses of the LED
heads with soft tissue paper or Wiper.
Note
z
Do not use methyl alcohol or thinner. Doing so could
damage the LED heads.
5
Confirm that the dirt has been removed
from the LED heads.
6
Close the top cover.
Note
z
When closing the top cover, there is a risk of
pinching your fingers or hands in the top cover or
the top cover's support. Press on the top of the top
cover to close it.
z
There is a risk of pinching your fingers or hands if
you hold the LED head while closing the top cover.
Press on the top of the top cover to close it.
To Next Page
Loading...
