Oldham MX 32 - RS485 Communication Setup

18
MX 32
Instruction Manual
PRG Menu (Programming)
To quit a menu at any stage, press the (-) and (+) buttons
together.
This menu allows the user to program measurement channel configurations
such as:
Action or result
Illustration
■ The PRG indicator blinks.
Selecting the channel to be programmed
■ Confirm by pressing (MENU/ENTER).
The Channel 1 icon blinks indicating
Channel 1 has been selected.
■ To select Channel 2, press (+).
The Channel 2 icon blinks indicating
Channel 2 has been selected.
■ Confirm the channel to be programmed by
pressing (MENU/ENTER).
- ON blinks.
- The icon is displayed.
- The yellow fault indicator (Figure 2, ref.
N) for the corresponding channel blinks.
The alarm relays for the channel are
blocked.
Start-up or stopping the channel
■ Activating or deactivating the channel:
- (-) deactivates the channel (channel
stopped).
- (+) activates the channel (channel in
operation).
■ Confirm by pressing (MENU/ENTER).