Olimpia splendid B0873 - General Safety Precautions

Bi2 Air AR
ENGLISH
EN - 3
WHEN USING ELECTRICAL EQUIPMENT,
BASIC SAFETY PRECAUTIONS MUST ALWAYS BE FOLLOWED IN
ORDER TO REDUCE RISKS OF FIRE, ELECTRIC SHOCKS
AND INJURY, INCLUDING THE FOLLOWING:
0.2 - GENERAL WARNINGS
1. This document is restricted in use to the terms of the law and may not be
copied or transferred to third parties without the express authorization of the
manufacturer, OLIMPIA SPLENDID.
  Ourmachinesaresubjecttochangeandsomepartsmayappeardi󰀨erentfrom
theonesshownhere,withoutthisa󰀨ectingthetextofthemanualinanyway.
2. Read this manual carefully before performing any operation (installation,
maintenance, use) and follow the instructions contained in each chapter.
3. Keep the manual carefully for future reference.
4. After removing the packaging, check that the appliance is in perfect condition.
The packaging materials must not be left within reach of children as they can
be dangerous.
5. THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES TO PERSONS
OR PROPERTY CAUSED BY FAILURE TO FOLLOW THE INSTRUCTIONS IN
THIS MANUAL.
6. The manufacturer reserves the right to make any changes it deems advisable to
its models, although the essential features described in this manual remain the
same.
7. Failing to comply with the instructions contained in this manual, and using
the unit with temperatures exceeding the permissible temperature range will
invalidate the warranty.
8. During assembly and at each maintenance operation, it is necessary to respect
the precautions indicated in this manual and on the labels located inside or on
the appliance, as well as to take all the precautions suggested by common sense
and by the Safety Regulations in force in the country of installation.
 9. Conformityofthefanradiators/fancoilsinaspecicsystemshallbeveried
and ensured by the installer in compliance with the applicable laws and rules.
10. To prevent any electrocution risk, it is essential to disconnect the plug from the
power socket before carrying out any maintenance operation on the appliance.
11. Disassembly, repair or reconversion performed by an unauthorized person
could cause heavy damages and will cancel the manufacturer warranty.