Olimpia splendid B0873 - Fan Coil Kit Installation Guide; Management of Fan Coil - 4-Speed Thermostat (Without Flap)

Bi2 Air AR
S
1
1b
1a
1a
1
4
3
3
1
2
2
4
2
3
ENGLISH
EN - 5
0.6 - KIT INSTALLATION ON THE FAN COIL
a. Undo the screws (1a) and remove the cover (1b)
of the box (1) (g.1).
b. Wedge in the locks (2) in the specic slots (3)
located on the side of the appliance (g.2).
c. Secure the box (1) to the appliance by means of
the two screws (4) (g.2).
d. Connect the ground cable to the appliance struc-
ture using the supplied screw (minimum force for
screwing is 4 N) (g.3).
e. Connect the water probe connector (S) on the
appliance and check that the water probe (S) is
correctly inserted in the cockpit located on the
battery (g.3).