Olimpia splendid CI2 WALL - Settings and Modes

ENGLISH
EN - 15
4.5 - SETTING THE TEMPERATURE
• In the operating modes (with exception of the FAN mode), the temperature can be adjusted from 17°C
to 30°C (62°F to 88°F) using the and keys.
NOTE:
The temperature cannot be adjusted in FAN mode.
4.6 - SETTING THE ON/OFF TIMER
• Press the key to set the timer on/off function. The and icon are shown on the display.
• Press the and keys to adjust the timer in switch-on mode.
When the timer setting is lower than 10 hours, every time the and keys are pressed, the
time will increase or decrease by 30 minutes.
When the timer setting is higher than 10 hours, every time the and keys are pressed, the
time will increase or decrease by 1 hour.
• After having set the timer, press the keyorwait5secondstoconrmthesettingandexitthe
function.
• Press the key to set the timer in switch-off mode.
• Operate as described to set the timer in switch-on mode.
• To deactivate the timer function, press the key to enter the function, and then set the switch on and
switch off values at 0:0h.
NOTE:
If the wired remote control has been set at timer ON/OFF, press ON/OFF to switch the unit on/off.
4.7 - SETTING THE CLOCK
• Hold the key down for 3 seconds to enter the current time setting functions.
• Thetimeontheclockashes;adjustthetimeusingthe and keys.
• Press the or keystoconrmthetimeandsettheminutes.
Adjust the minutes using the and keys.
• Press the keyorwait5secondstoconrmthesettingandexitthefunction.
4.8 - SILENT OPERATING MODE
• In COOL (Cooling), HEAT (Heating) and FAN (Ventilation) mode, press the key to set the “silent”
function. With this function active, the motor fan speed lowers, consequently decreasing the noise of the
appliance.
NOTE:
This mode cannot be selected in AUTO and DRY (dehumidication) mode.