EasyManua.ls Logo

Olimpia splendid DOLCECLIMA BREZZA - USE OF THE APPLIANCE; Remote Control and Panel Overview; ELECTRICAL CONNECTION AND DRAINAGE; Power Connection and Condensation Drainage

Olimpia splendid DOLCECLIMA BREZZA
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DOLCECLIMA BREZZA
C
B6 B7
B4
B3
B8
B2
B1
B5
EN - 13
ENGLISH
2.4 - ELECTRICAL CONNECTION
The appliance is tted with a power cable with plug.
Before connecting the air conditioner ensure that:
The voltage and power frequency values match those specied on the
appliance plate data.
The power line is equipped with an effective earth connection and is
correctly sized for maximum power consumption of the air conditioner.
The appliance’s power network must be equipped with a suitable
omnipolar disconnection device compliant with national installation
regulations.
The appliance is powered solely through a socket compatible with the plug provided.
CAUTION
Any replacement of the power cable must be carried out solely by Olimpia Splendid
technicalsupportorbysimilarlyqualiedpersonnel.
2.5 - DRAINAGE
Depending on the mode of operation of the appliance, it is necessary to connect the condensation drainage
hose. For use as dehumidier or heat pump (only for suitable models) work as follows (Fig.12-13a-13b):
a. Unscrew the cap (28) or the cap (35) for models with heat pump.
b. Remove the rubber cap (32).
c. Insert the pipe (7) in the connector.
Make sure the end of the discharge pipe (7) is positioned on a drain well or in a container.
Make sure the pipe (7) is not clogged.
3 - USE OF THE APPLIANCE
The functioning modes if the air conditioner can be selected both through the remote control and through the
control panel located on board of the air conditioner.
The reception of the selected function is conrmed by the emission of a “beep” by the buzzer.
3.1 - REMOTE CONTROL KEYS (Fig.C)
B1: ON/OFF key;
B2: “Timer” key;
B3: “Sleep” key;
B4: Temperature increase/delay key;
B5: Temperature decrease/delay key;
B6: “Fan”;
B7: “Mode” key
cooling =˃
=˃ dehumidication =˃
=˃ fan only =˃
=˃ heating (active only in the version with
heat pump)=˃
=˃ cooling =˃ ...
B8: “Swing” key

Table of Contents

Related product manuals