Olimpia splendid DOLCECLIMA BREZZA - A - Cleaning the Appliance and the Remote Control; B - Cleaning the Suction Filter; C - Recommendations for Energy Saving; Cleaning

EN - 18
ENGLISH
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control
a. Use a dry cloth to clean the appliance and the remote control.
b. It is possible to use a cloth moistened with cold water to clean the appliance in case it’s very dirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic surface.
4.1.b-Cleaningthesuctionlter
To ensure the indoor air is ltered correctly and to guarantee that your air conditioner runs efciently, it is
vital to clean the air lters regularly.
 Adirtyairlterreducesthecoolingcapacityoftheappliance.Pleasecleanthelteronceevery2
weeks.
a. Release the grille (27) together with the lter (27a) and raise it to remove it from the appliance (Fig.15).
b. Remove the lter (27a) from the grille (27) (Fig.16).
c. Clean the lter (27a) using a vacuum cleaner or wash it with water, then let it dry in a fresh environment.
d. Suck possible uff from the plates (Fig. 17).
Provideforthelter(27a)replacementifitisdamaged.
e. Make sure the lter (27a) has dried completely.
f. Reposition the lter (27a) in the grille (27) paying attention to its correct positioning.
g. Position the grille (27) together with the lter (27a) on the appliance body making sure it is correctly hooked
(Fig.18).
Donotusetheappliancewithoutthelter(27a).
4.1.c - Recommendations for energy saving
Below nd simple recommendations for reducing consumption:
• Always and constantly keep the lters clean (see maintenance and cleaning chapter).
• Keep the doors and windows of the rooms to be climate controlled closed.
• Do not let sun rays penetrate freely into the room (we recommend using curtains or lowering blinds or
closing the shutters).
• Do not obstruct the air ow path (input and output) of the appliance; this, in addition to obtaining a non-op-
timal yield, also affects the correct operation of the appliance and the possibility of irreparable damages to
the appliance itself.
4.2 - MAINTENANCE
If you do not intend to use the appliance for a long period of time, work as follows:
a. Activate the fan only mode for a few hours (approximately 1÷2 hours) to dry the interior of the appliance.
b. Stop the air conditioner and disconnect the power supply.
c. Clean the air lter.
d. Completely discharge condensation.
e. Wrap the power supply cable (34) around the cable winder (33) and insert the plug in the specic housing
(31) (Fig.21).
f. Remove the batteries from the remote control.
g. Place the appliance in its original packaging and store it in a fresh and dry environment, away from direct
exposure to sunlight.