Olimpia splendid UNICO EASY S1 User Manual

ENGLISH
EN - 24
6 - INCONVENIENCES AND POSSIBLE REMEDIES
Malfunction Cause What do i do?
The appliance doesn’t work. Current failure Wait for the current to be restored.
The unit is disconnected from the
current.
Check that the plug is inserted in the
wall socket.
The appliance doesn’t switch on. Too much water has collected inside
the air conditioner.
Drain the water off by removing the
plug (28). Call the Assistance
Centre if this alarm occurs too often.
Timer is ON. Switch off the timer.
The appliance only works for a
small amount of time.
The temperature set is too close to
ambient temperature.
Lower the temperature set.
Suction of outside air is obstructed. Remove the obstructions.
Call the Service Centre.
The appliance doesn’t cool e󰀩-
ciently.
Theairltersarecloggedbydust,
ufforanimalhair.
Switch off the appliance and clean
theltersfollowingtheinstructions.
Temperature setting is too high. Reduce the set temperature.
The windows or doors of the room
are open.
Make sure all the windows and the
doors are closed.
The room area is too large. Check the cooling area again.
Heat sources are present inside the
room.
Remove the heat sources if possible.
The appliance is noisy and vi-
brates excessively.
The appliance bearing surface is not
levelled.
Place the appliance on a at and
levelled surface.
Theairltersarecloggedbydust,
ufforanimalhair.
Switch the appliance off and clean
theltersfollowingtheinstructions.
The appliance emits an
abnormal sound.
This sound is caused by the refriger-
antowinsidetheunit.
It is totally normal.
Water leaks from the conditioner
during transport.
The conditioner has been tilted or
laidat.
Empty water before moving the
appliance.
In cooling, night-time or
automatic mode, minimum
speed cannot be selected.
Ambient temperature too low. Air conditioner behaviour is normal.
If the problem has not been solved, please contact the nearest technical assistance service.
Please give detailed information about the malfunction and on the equipment version.

Olimpia splendid UNICO EASY S1 Specifications

General

Type	Monobloc mobile air conditioner
Timer type	Digital
Noise level	60 dB
Hose diameter	162 mm
On/off switch	Yes
Number of speeds	3
Airflow (low speed)	335 m³/h
Airflow (high speed)	405 m³/h
Refrigerating medium	R410A
Airflow (medium speed)	370 m³/h
Cooling capacity (max)	- BTU/h
Dehumidifying capacity	2.2 l/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Fan, Heating
Refrigerating medium weight	515 g
Cooling capacity in watts (max)	- W
International Protection (IP) code	IPX0
Cooling capacity in watts (nominal)	2000 W
Heating capacity in watts (nominal)	1800 W
Cooling energy efficiency (EER, W/W)	2.6
Heating energy efficiency (COP, W/W)	2.7
Current	1 A
Connected load	1036 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A+++ to D
Energy efficiency class (cooling)	A
Energy efficiency class (heating)	B
Annual energy consumption (cooling)	- kWh
Hourly energy consumption (cooling)	0.8 kWh
Hourly energy consumption (heating)	0.7 kWh
Control type	Touch
Display type	LED
Product color	White
Housing material	Plastic

Weight and Dimensions

Depth	276 mm
Width	665 mm
Height	693 mm
Weight	35600 g
Package depth	423 mm
Package width	865 mm
Package height	770 mm
Package weight	40900 g