Olimpia splendid UNICO EASY S1 - 4.2 MAINTENANCE PROCEDURES; 5 - TECHNICAL DATA

UNICO EASY S1
ENGLISH
EN - 23
4.1.c - Recommendations for energy saving
Belowndsimplerecommendationsforreducingconsumption:
• Alwaysandconstantlykeeptheltersclean(seemaintenanceandcleaningchapter).
• Keep the doors and windows of the rooms to be climate controlled closed.
• Do not let sun rays penetrate freely into the room (we recommend using curtains or lowering blinds or
closing the shutters).
• Donotobstructtheairowpath(inputandoutput)oftheappliance;this,inadditiontoobtaininganon-op-
timal yield, also affects the correct operation of the appliance and the possibility of irreparable damages to
the appliance itself.
4.2 - MAINTENANCE
If you do not intend to use the appliance for a long period of time, work as follows:
a. Stop the air conditioner and disconnect the power supply.
b.Cleantheairlters.
c. Completely discharge condensation.
d. Remove the batteries from the remote control.
Checks before resuming use of the air conditioner:
a. Cleantheltersafteralongperiodofinactivityoftheairconditioner.
b. Check that the air outlet or inlet are not obstructed (especially after a long period of inactivity of the air
conditioner).
4.2.a - Discharging condensation
a. Disconnect the plug from the power socket.
b. Carefully move the appliance in position suitable to unload water.
c. Remove the drain cap (26) (Fig.22).
Makesureyoucorrectlytightenedthedraincap(26)inordertoavoidwaterleak.
d. Make water unload completely.
e. Tighten the drain cap (26) (Fig.23).
f. Insert the plug into the power outlet and re-start the machine.
5 - TECHNICAL DATA
For the technical data, please consult the data plate applied to the product.
Theunit’scircuitboard(PCB)isdesignedwithafusetoprovideovercurrentprotection.Thespecications
of the fuse are printed on the circuit board, such as: T 3.15A/250V, etc.
• Dimensions(WxHxD) 693 x 665 x 276 mm
• Workingtemperaturelimits inCool-
ing function
18° - 32°
• Workingtemperaturelimitsinheating
function
16° - 27°
• WorkingtemperaturelimitsinDehu-
midicationfunction
18° - 32°
• Refrigerantgas R410