37
TAKING
PICTURES
5
Adjust the exposure
compensation setting using
the / buttons and
press the button.
Press [–] to make the image
darker and
[+] to make it lighter.
Setting of exposure compensation is
completed.
Press the
button again to exit the
menu.
6
Take the picture.
Note
• The setting of exposure compensation will be returned to ±0.0
(default setting) when the lens barrier is closed.
• When you adjust the exposure compensation, the image
displayed on the monitor changes to the relevant brightness
setting. If it is hard to see any difference because the subject
is dark, display the recorded image on the camera’s monitor
to check the brightness.
Caution
• The desired brightness (exposure compensation) may not be
obtained if the flash is used.
• The exposure compensation values may be inadequate if the
subject is in extremely bright or extremely dark surroundings.
EXPOSURE COMPENSATION
To Next Page
Loading...
