50
PLAYINGBACK
PICTURES
ERASING AN IMAGE
1
Close the lens barrier and
press the button.
The monitor will turn on.
2
Display the image you want to erase.
See “Playing back an image” ( p. 45).
3
Press the button.
The Play menu screen will be
displayed.
4
Select [PLAY] using the /
buttons and press the
button.
5
Select [ ] using the /
buttons and press the
button.
6
Select [ ] using the /
buttons and press the
button.
The image will be erased.
Caution
• You can also move to the erase menu by keeping the
button pressed for at least 1 second while the image you want
to erase is displayed.
• If the image you want to erase is protected or a write-protect
seal is affixed to the SmartMedia card, the image cannot be
erased. Unprotect the image or remove the write-protect seal
on the SmartMedia card before attempting to erase the image.
• Erased images cannot be restored. Before erasing an image,
be sure that you are not erasing important data.
To Next Page
Loading...
