63
OTHER
FUNCTIONS
DISPLAYING IMAGE INFORMATION
This function enables you to set display or non-display of image information
on the monitor while the image is played back. If you enable this function,
this information will be displayed for 5 seconds. For details of the items
displayed, see “Play mode screen” (
p.10).
Image data display ON Image data display OFF
1
Close the lens barrier and
press the button.
The camera will turn on in Play mode.
2
Press the button.
The Play menu screen will be displayed.
3
Select [PLAY] using the /
buttons and press the
button.
4
Select [INFO] using the /
buttons and press the
button.
5
Select [ON] using the /
buttons and press the
button.
The image information will be
displayed on the playback screen.
Press the button again to exit the
menu.
Note
The image information setting will return to OFF (default setting)
when the camera is turned off.
To Next Page
Loading...
