52
PLAYINGBACK
PICTURES
PROTECTING IMPORTANT IMAGES
1
Close the lens barrier and
press the button.
The monitor will turn on.
2
Display the image you want to protect.
See “Playing back an image” ( p. 45).
3
Press the button.
The Play menu screen will be displayed.
4
Select [PLAY] using the /
buttons and press the
button.
5
Select [ ] using the /
buttons and press the
button.
6
Select [ON] using the /
buttons and press the
button.
The image will be protected.
To cancel the protect setting, select
[OFF].
Note
• You can also protect an image by keeping the button
pressed for at least 1 second while the image you want to
protect is displayed.
• The protected image is indicated by a
symbol.
• The protect setting is saved when the camera is turned off.
Caution
• Protected images cannot be erased by [Erasing an image] or
[Erasing all images], but will be erased by formatting the card.
• Images on a card with a write-protect seal cannot be
protected.
To Next Page
Loading...
