61
OTHER
FUNCTIONS
REC VIEW
After each picture is taken, you can confirm the image on the LCD monitor.
1
Open the lens barrier.
The camera will turn on in Record
mode.
2
Press the button.
The Camera menu screen will be
displayed.
3
Select [SETUP] using the /
buttons and press the
button.
4
Select [REC VIEW] using the
/ buttons and press
the button.
5
Select [ON] using the /
buttons and press the
button.
ON:
The last image taken is displayed
after shooting is completed. →
Straight to image confirmation
OFF:
The screen for shooting the next
picture is displayed immediately
after shooting is completed. →
Straight to next shooting
Setting of Rec View is completed.
Press the
button again to exit the menu.
Note
The Rec View mode is saved when the camera is turned off.
To Next Page
Loading...
