42
TAKING
PICTURES
5
Select the image quality from
the following using the /
buttons and press the
button: [SHQ 1280 × 960], [HQ
1280 × 960], [SQ1 1024 × 768]
or [SQ2 640 × 480].
Setting of image quality is completed.
Press the
button again to exit the
menu.
6
Take the picture.
Note
• The image quality setting will remain even when the lens
barrier is closed.
• The number of recordable images varies depending on the
image quality setting and the storage method used. (The
camera’s internal memory capacity is 1MB, SmartMedia cards
are currently available in 8MB to 128 MB capacities.)
• The number of pixels is the same for HQ and SHQ, but the
compression rate is lower for SHQ, resulting in a clearer
image when enlarged. SHQ also requires more time to record
and play back images than HQ.
• When you change to a high image quality and the remaining
recordable image count is low, the internal memory or
SmartMedia card warning mark may be displayed. This
indicates that there is insufficient memory space. If this
happens, select a different
image quality.
IMAGE QUALITY
Warning mark
To Next Page
Loading...
