TURNING THE POWER ON/OFF
When shooting pictures
1 Press the tabs on the lens cap as
indicated by the arrows and remove
the lens cap.
Turn the mode dial until the mode
you want to use is aligned with the
red line. Choose from p/A/S /
M/_ /_ /% / _/_/_,/_ ,
Turn the power switch so that ON
is aligned with the white line.
• The camera turns on and the Iens
extends.
To turn the power off, turn the
power switch so that OFF is
aligned with the white line.
When playing back pictures
1 Turn the mode dial until [] is aligned with the red line.
2 Turn the power switch so that ON is aligned with the white line.
• The monitor turns on.
3 To turn the power off, turn the power switch so that OFF is
aligned with the white line.
• The monitor also turns off.
16 En
To Next Page
Loading...
