SEQUENTIAL SHOOTING
There are 4 sequential shooting modes: high speed sequentiaI shooting,
sequential shooting, AF sequentiaI shooting and auto bracketing. Sequential
shooting modes can be setected from the DRIVE mode menu
Sequential shooting cannot be performed when the record mode is set to
TIFF
Drive mode
E_ Shoots 1 frame at a time when the shutter button is pressed
(Normal shooting mode, single-frame shooting)
H I E_ Pictures can be taken at a faster speed than normal sequential
shooting. The sequential shooting speed varies depending on the
record mode setting.
4 frames at 3.3 frames/sec (3 frames in SHQ ENLARGE SIZE
mode)
E_ Focus, exposure and white balance are Iocked at the first frame.
Approx. 11 frames at 1.7 frames/sec (in HQ mode)
AF E_ Focus is individually locked for each frame The AF sequentiaI
shooting speed is slower than for normal sequential shooting.
BKT When auto bracketing is set, the exposure is changed
automatically for each frame when you start shooting The
exposure differential and number of frames can be selected in the
menus. The focus and white balance are locked at the first frame
_MENU FUNCTIONS - Mode menus
METERING
There are three ways of measuring the brightness of a subject
Digital ESP metering: Meters the center of the subject and the surrounding
area separately.
Spot metering : Exposure is determined by metering within the AF
target area In this mode, a subject can be shot with
optimal exposure regardless of the background light.
Multi-metering : Meters the brightness of the subject at up to 8 different
points to set the optimal exposure based on the
average brightness This method is useful with a high
contrast subject.
_¢ MODE DIAL AND DIRECT BUTTON FUNCTIONS - Direct buttons
En 37
To Next Page
Loading...
