EasyManua.ls Logo

Olympus CAMEDIA C-5050 Zoom - Erasing Pictures; Single-Frame Erase

Olympus CAMEDIA C-5050 Zoom
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When FRAME BY FRAME is selected
Displays the first frame of the movie.
Displays the last frame of the movie
Displays the next frame The movie can be played continuously by
holding the button down
Disptays the previous frame The movie can be played continuously in
reverse by hotding the button down.
Displays the MOVIE PLAYBACK menu
PROTECTING PICTURES
You are recommended to protect important pictures to avoid accidentally
erasing them
1 Set the mode dial to [] and turn the camera on.
The monitor turns on.
2 Use the arrow pad or jog dial to display the picture you
want to protect.
3 Press on.
To cancel protection, press O_ again.
:;:_,, Protected pictures cannot be erased by the single-frame/all-frame
X..._ erase function, but they are all erased by formatting
Note
ERASING PICTURES
This function enables you to erase recorded pictures. This can be done either
one frame at a time or to all the pictures on the card at once
Once erased, pictures cannot be restored. Check each picture
l_ before erasing to avoid accidentally erasing pictures you want to
Note keep.
Single-frame erase
1 Set the mode dial to [] and turn the camera on,
The monitor turns on.
2 Use the arrow pad or jog dial to display the picture you
want to erase.
En 41

Other manuals for Olympus CAMEDIA C-5050 Zoom

Related product manuals