3 Press /_.
• The t_ ERASE screen isdispIayed.
4 Press _ _ to select YES, then press @.
• The picture is erased and the menu is closed.
All-frame erase
1 In the top menu, select MODE MENU > CARD > CARD
SETUP, and press _).
2 Press <:_ _ to select /_ ALL ERASE, then press _.
3 Press _ to select YES, then press _.
• All the pictures are erased.
FORMATTING (CARD SETUP)
This function tets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format them with this camera.
• All existing data, including protected data, is erased when the card
,._z;> is formatted Once erased, pictures cannot be restored, so make
Note sure that you do not erase important image data Download
important image data to a PC before formatting the card.
In the top menu, select MODE MENU --> CARD --> CARD
SETUP, and press _).
• P A S M _2 [] k Pa "_, _
The _] FORMAT screen is displayed.
.[]
The CARD SETUP screen is displayed
If the mode dial is set to p A S M _ [_ _tL _ "_ _1!,
press _ to select _ FORMAT.
If the mode dial is set to [], press _ to select
FORMAT, then press _. The _] FORMAT screen is
displayed. Press <:Dto select YES.
Press _,
• The busy bar isdisplayed and the card is formatted
42 En
To Next Page
Loading...
