PLAYBACK ON A TV
Use the AV cable provided with the camera to play back recorded images on
your TV.
1 Make sure that the TV and camera are turned off.
Connect the A/V OUT jack on the camera to the video
input terminal on the TV using the AV cable,
Connect to the TV's video
input(yellow) and audio ,_,_/_
input (white)terminals //_-_
AV cable _/,
NV OUT jack (M©NO)
2 Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV's instruction
manual
3 Turn the camera on and set the mode dial to [].
• The Iast picture taken is displayed on the TV Use the arrow pad to
setect the picture you want to display
• The close-up playback, index display and slideshow functions can also
be used on a TV screen
_,,._ • You are recommended to use the optional AC adapter when using
the camera with a TV
Note • Make sure that the camera's video output signal type is the same as
the TV's video signal type.
En 43
To Next Page
Loading...
