USING THE MENUS AND TABS
When you turn on the camera and press @, tile top menu is displayed on
the monitor The functions of this camera are set from the menus. This
chapter explains how the menus work, using the P mode screens.
I € Thetop ..... is d,sp,ayed
Press @.
[ SHORTCUT MENUS ]
• Take you directly to the setting
screens
• Disptay operational buttons at the
bottom of the screen.
• The functions registered in the
shortcut menus can aIso be
accessed from the MODE
MENU.
• You can change shortcut menus
other than _ [] modes.
HOW to use the menus
_._ tUoSsetlheetarr°w nPuad
[ MODE MENU
• Lets you access the menu
selections to set the ISO,
sharpness, etc.
• Categorizes the settings into 4
tabs
• Displays the CAMERA,
PICTURE, CARD and SETUP
tabs Select the desired tab on
the teft of the screen by pressing
_.
1 Press @ to display the top menu. Press _).
2 Press _ _ to select a tab, then press _).
3 Press @ _ to select an item, then press _.
4 Press @ @ to select a setting. Press (_) to complete
setting.
Press @ again to exit the menu and return to shooting
status.
En 19
To Next Page
Loading...
