By connecting the camera to a computer with the provided USB cabte,
images on a card can be transferred to the computer Some OS's (operating
systems) may need a speciat setup before connecting to the camera for the
first time. Follow the chart below. For details of the procedures in the chart,
refer to the "Reference Manual '_on the software CD Also refer to the
"Software Installation Guide '_included in the CD-ROM package
J Identifying the OS
÷
Windows 98/ [
98 SE (Second
Edition)
Installing the USB
dr ver for W ndows 98
Windows Me/2000/XP
J[ Mac OS 9.0- 9 1/
osx (10o)
* ForOS 8.6. see below
L
I Connecting the camera to the computer using the provided USB cable
J Confirming the computer recognizes the camera J
I Downloading image files
L Disconnecting the USB cable
* Even if your computer has a USB connector, data transfer may not
function correctly if you are using one of the operating systems listed
below or if you have an add-on USB connector (extension card, etc.)
• Windows 95/NT 4.0
• Windows 98/98 SE upgrade from Windows 95
• Mac OS 86 or Iower (except Mac OS 8.6 equipped with USB MASS
Storage Support 135 installed at the factory)
• Data transfer is not guaranteed on a home-built PC system or PCs with no
factory installed OS.
• You can view images using: graphics applications that support the
JPEG file format (Paint Shop Pro, Photoshop, etc.); Internet
Note browsers (Netscape Communicator, Microsoft Internet Explorer,
etc.); CAMEDIA Master software; or other software. For details on
using commercial graphics applications, refer to their instruction
manuals.
En 46
To Next Page
Loading...
