To Next Page

To Previous Page

CX21LED

CONTENTS

7-11

IMPORTANT — Be sure to read this section for safe use of the equipment. —

1 STANDARD COMPONENT UNITS

2 NOMENCLATURE

4 DETAILED OBSERVATION PROCEDURE

SUMMARY OF BRIGHTFIELD OBSERVATION PROCEDURE

1-3

10-1 System Diagram of Optional Accessories .............................................................................. 18

10-2 Installation and Operation of Optional Accessories ................................................ 18

1 Turning the LED Illumination ON .......... 7

Adjusting the Focus ................................................

5 Adjusting the Diopter ............................................ 9

Placing Specimen on the Stage

..................... 7

Adjusting the Interpupillary Distance

....................

5 ONE-POINT ADVICE

6 TROUBLESHOOTING GUIDE

7 SPECIFICATIONS

8 OPTICAL CHARACTERISTICS

9 ASSEMBLY

10 OPTIONAL ACCESSORIES

13,14

18-20

1 Filter Holder CH2-FH and Darkfield Ring CH2-DS........................................................................................................ 18

Reflection Mirror CH20-MM ...........................................................................................................................................................................

3 Eyepieces WHC15X/WHC15X-H

........................................................................................................................................................................................................

4 Using the eyepiece micrometer

6 Adjusting the Condenser Position and Aperture Iris Diaphragm ............................................................. 10

Switching the Objectives.............................

Using the 100X Immersion Objective ....................

PROPER SELECTION OF THE POWER SUPPLY CORD ......................................................... 21,22