Olympus CX31 - Maintenance and Storage; Cleaning and Storage Procedures; General Cautionary Notes

CX31
4
NOMENCLATURE
}The revolving nosepiece is fastened with a band to prevent it from turning during transportation. Remove the band when
unpacking the microscope. Be sure to store the band for re-transportation of the microscope.
* The stage is shipped with the two transport pins locked. When using the microscope for the first time, remove the transport
lock pins before use.
}If you have not yet attached the lamp bulb and power cord to the microscope, read Chapter 3, “ASSEMBLY” on pages 6 to 7.
Specimen holder
(Page 10)
Condenser
Aperture iris
diaphragm knob
(Page 13)
Filter holder
Place a 45 mm filter on this.
Condenser
centering screws
(Page 13)
Field iris diaphragm ring
Objective
Revolving Nosepiece
Diopter
adjustment ring
(Page 11)
Transport lock pin*
Observation Tube
Binocular tube: CX31RBSF microscope frame
CX31RBSFA microscope frame
Tilting tube: CX31RTBISF microscope frame
Microscope Frame
CX31RBSF
CX31RBSFA
CX31RTBISF
Stage
Interpupillar distance scale (Page 11)
Tube clamping screw
(Use the provided Allen wrench.)
Simplified pre-focusing dial (Page 9)
Transport lock pin*
Main switch
(Page 8)
Light intensity
control knob
(Page 8)
Fine focus
adjustment knob
(Page 9)
Coarse focus
adjustment knob
(Page 9)
X-axis knob (Page 11)
Y-axis knob (Page 11)
(Fixed at 10X)
Eyepieces