9
CX43
1
Turning ON the LED illumination
Set the main switch
a
to
(ON).
Rotating the brightness adjustment knob
b
in the arrow direction
increases the brightness and rotating it in the opposite direction
decreases the brightness.
1
2
4-1 Base portion
4 Operating procedures of each portion
2
Using the filter
Engage the filter in the light path if necessary
Engage the filter in the filter holder (window lens
a
) of the base portion
of the microscope frame.
One to several filters of 45mm in diameter can be inserted in
stack.
(Insertable thickness: up to 1.6mm)
If it is difficult to attach the filter due to the narrow space,
rotate the coarse focusing knob to raise the stage.
1
a
b
a
To Next Page
Loading...
