1
Inserting/removing an SD card
21
EN
Inserting/removing an SD card
Inserting an SD card
NOTE
• The voice recorder may not be able
t
o recognize an SD card formatted
(initialized) for a PC or other device.
Before using an SD card, always
initialize it on the voice recorder
(☞ P.101).
SD cards
You cannot perform recording or erasing if
the write protect switch is set to the [LOCK]
side.
Write protect
switch
Removing an SD card
1
While the voice recorder is in stop
mode, open the card cover.
2
Release the SD card by pressing
it inw
ard, then letting it slowly
return.
• The SD card moves outward and
stops. Pull the SD card out with your
fingertips.
• [Internal memory selected] is
displayed after removing an SD card, if
[Memory Select] was set to [SD card].
3
Close the card cover.
To Next Page
Loading...
