Olympus DM-7 - Disconnecting the Voice Recorder from a PC

7
PC connection/disconnection
111
EN
PC connection/disconnection
Connecting the voice recorder to a
PC
NOTE
• The voice recorder must not be in
HOLD mode
.
• Insert the USB connector securely all
the way. Operation will not be normal if
the connection is not made properly.
• Connecting the voice recorder through
a USB hub may result in unstable
operation. Do not use a USB hub if
operation is unstable.
• Use only a compatible Olympus USB
extension cable. Operation is not
guaranteed if another manufacturer’s
cable is used. Also, never use this
dedicated cable with any other
company’s products.
• When transferring data to a PC, set
the Wi-Fi ON/OFF switch to OFF. If
the Wi-Fi ON/OFF switch is set to ON,
the recorder will not be recognized by
the PC.
Disconnecting the voice recorder
from a PC
Windows
1
Click [ ] on the task bar in the
lower right hand corner of the
screen and click [ Safely remove
USB Mass Storage Device ].
• The letter used to identify the drive
will vary according to your PC.
• When the window indicating it is safe
to remove hardware appears, close the
window.
2
Check that the LED indicator light
of the voice recorder is OFF and
then disconnect the USB cable.