Olympus DS 30 User Manual

28
2
Using the Variable Control Voice Actuator (VCVA)
When the microphone senses that sounds have reached a preset threshold volume level, the
built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops when
the volume drops below the threshold level.
The VCVA feature extends recording time and conserves memory by stopping recording
during silent periods, which helps the playback to be more efficient.
1
While the recorder is stopped or
during recording, press the MENU
button for 1 second or longer.
The menu opens (☞ P91,93).
2
Press the + or – button to choose
“VCVA”.
3
Press the OK or 9 button.
The VCVA setup process begins.
4
Press the + or – button to choose
between “On” and “Off”.
On: Will start recording in VCVA mode.
Off:
Will resume recording in normal mode.
When “On” is selected, a VCVA indication
will be displayed on the screen.
a VCVA (Variable Control Voice Actuator)
indicator
5
Press the OK button to complete the
setup screen.
If the 0 button is pressed, the setting will
be canceled and it will return to the menu.
6
Press the STOP button to close the
menu.
If it returns to the menu screen during recording,
press the 0 button to close the menu screen.
Using the Variable Control Voice Actuator
5
6
1
2
3
4

Olympus DS 30 Specifications

General

Built-in microphone	Yes
Maximum recording time	66 h
Display type	LCD
Battery type	AAA
Dimensions (WxDxH)	117 x 16 x 37.5 mm
Number of batteries supported	2
Internal memory	256 MB

Weight and Dimensions

Weight	80 g