Olympus DS 30 - Default Chapter; Backlight (Backlight)

84
5
Backlight (Backlight)
The recorder display backlight is On by default. The display will remain lit for about 10 seconds
when a button on the recorder is pressed.
Backlight
1
While the recorder is stopped, press
the MENU button for 1 second or
longer.
The menu opens (☞ P.91,93).
2
Press the + or – button to choose
“Backlight”.
3
Press the OK or 9 button.
The Backlight setup process begins.
4
Press the + or – button to choose
between “On” and “Off”.
On: Backlight is enabled.
Off: Backlight is disabled.
5
Press the OK button to complete the
setup screen.
If the 0 button is pressed, the setting will
be canceled and it will return to the menu.
6
Press the STOP button to close the
menu.
5
6
1
2
3
4