Olympus E-420 - Setting the Date; Time

Basic guide
15
EN
Setting the date / time
CF
5
SEC
CF/xD
REC VIEW
ENG.
NTSC
VIDEO OUT
CANCEL SELECT GO
’ -- . -- . --
--
: --
j ±0 k ±0
Date and time information is recorded on the card together with
the images. The file name is also included with the date and time
information. Be sure to set the correct date and time before
using the camera.
CARD SETUP
NORM
AUTO
CUSTOM RESET
PICTURE MODE
GRADATION
WB
CANCEL SELECT GO
N
Y
Y/M/D
CANCEL
MD TIME
2008
Y
Y/M/D
CANCEL
MD TIME
2008 08 01 14 00
Y
Y/M/D
MD TIME
GO
CANCEL
2008 08 01 14 00
Y
Y/M/D
MD TIME
GO
CANCEL
CF
5
SEC
CF/xD
REC VIEW
ENG.
NTSC
VIDEO OUT
CANCEL SELECT GO
j ±0 k ±0
’08.08.01
14:01
1 Press the MENU button
2 Use ac to select [ Z ],
then press
d
3 Use ac to select [ X ],
then press
d
4 Use ac to select [Y],
then press
d
5 Repeat this procedure until the
date and time are completely
set
6 Use ac to select the date
format
7 Press the i button
8 Press the MENU button to exit
MENU
button
• The time is displayed in the 24-hour format.
Arrow pad acbd
• The menu screen is displayed on the LCD
monitor.
Preparations for shooting