92
EN
9
Customizing your camera
FRAME ASSIST (Ruled lines display)
During live view, you can display the ruled lines on the LCD monitor as a guide when confirming
the composition. Press the
INFO
button repeatedly to display the ruled lines.
g
“Switching the information display” (P. 42)
Custom Menu 1
d
EXP /
e
/ ISO
ISO-AUTO SET
You can set the upper limit when ISO is set to
[AUTO].
This sets the upper limit of the ISO value that automatically changes. The upper limit can be set
from 100 to 1600.
ISO-AUTO
You can set the shooting mode in which the ISO
[AUTO]
setting is activated.
[
P
/
A
/
S
]
The
[AUTO]
setting is activated in all shooting modes except
M
mode. When
[AUTO]
is
selected in
M
mode, ISO 100 is set.
[ALL]
The
[AUTO]
setting is activated for all shooting modes. The ISO is automatically
selected to obtain the optimal ISO even in
M
mode.
AEL Metering
You can set the metering mode when pressing the
AEL
/
AFL
button to lock the exposure.
•
[AUTO]
performs metering in the mode selected under
[METERING]
.
BULB TIMER
You can select the maximum time (in minutes) for bulb shooting.
Custom Menu 1
e
#
CUSTOM
w
+
F
When set to
[ON]
, it will be added to the exposure compensation value and flash intensity
control will be performed.
AUTO POP UP
In
AUTO
or scene mode, the built-in flash pops up automatically in low light or backlight
conditions. When set to
[OFF]
, the built-in flash will not pop up automatically.
To Next Page
Loading...
