5
Observation/Acquisition Flow
Main ControlsIntroduction
When using the unit for the fi rst time:
Activation is required.
(For the Activation procedure, refer to
the Instruction Manual [Hardware].
The description in this section assumes
that the following preparation work has
been completed.
・ The cables are connected properly.
・ The software has been installed.
・ The lamp is attached.
(For the operating procedures for the
above, refer to the Instruction Manual
[Hardware].
CAUTION
Observation/
Acquisition
Procedure
p. 9
Operation Guide
Display
p. 10
Expanding
the Scope of
Acquisition
p. 11
To Next Page
Loading...
