What does 'High Temperature (Distal End)' mean on my Olympus Analytical Instruments?
If you receive a 'HIGH TEMPERATURE (DISTAL END)' message on your Olympus Analytical Instruments, the self-check function was triggered because the distal end was overheating. Immediately withdraw the insertion tube from the observation object.
Why my Olympus IPLEX UltraLite Analytical Instruments system cannot be turned on?
If your Olympus Analytical Instruments system will not turn on, ensure that the AC adapter or battery is correctly connected. Also, verify that the power button is activated. If these steps don't work, check that you are using the designated AC adapter or battery.
What to do if I get an 'Imager Error' on my Olympus IPLEX UltraLite Analytical Instruments?
If your Olympus Analytical Instruments display an 'IMAGER ERROR', the self-check function has been activated, which requires you to stop the current operation. Turn the instrument off and then on again.
How to fix 'No Recording Media' error on my Olympus IPLEX UltraLite Analytical Instruments?
If your Olympus Analytical Instruments device shows 'NO RECORDING MEDIA', it means that an SD card is not currently inserted. Please load an SD card into the device and try again.
What to do if I see a low battery warning on my Olympus Analytical Instruments?
If your Olympus Analytical Instruments display a 'LOW BATTERY' warning, immediately halt any image recording, copying, SD card formatting, or deletion processes. Replace the battery right away, or connect the device to an AC adapter.
Covers essential safety guidelines for handling the instrument and avoiding hazards.
Outlines specific safety measures for handling, charging, and disposing of batteries.
Identifies and labels all parts of the main unit and insertion tube.
Details the components and labeling of the distal end and optical adapter.
Explains the various elements displayed on the LCD monitor screens.
Procedures to perform before starting instrument operation.
Checklist for inspecting the instrument before and after use.
Guide to using the instrument for observing a target object.
Covers adjustments for brightness, zoom, and display modes.
Lists common error messages and problems with recommended solutions.
Outlines the procedure and precautions for requesting instrument repair.
General| Light Source | White LED |
|---|---|
| Probe Diameter | 4.0 mm (0.16 in.) or 6.0 mm (0.24 in.) |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Insertion Tube Length | 2 m |
| Illumination | Adjustable LED |
| Storage Media | SD card |
| Power | Rechargeable Li-ion battery |
To Next Page