16
IX2-UCB/U-HSTR2
Motorized Mirror Unit Turret
GX-RTUA
(Note 1) The applicable microscope is only the GX71.
(Note 2) Replace the manual mirror unit turret, provided as standard with the GX71, with
the motorized mirror unit turret.
(Note 3) Remove the mirror units from the manual mirror unit turret and put them in the
motorized mirror unit turret.
Motorized control cable
Mirror unit replacement cover clamping screw
Detachable using the Allen screwdriver provided
with the microscope.
Cable connector
Mirror unit replacement cover
*Mirror unit indicator numbers
Indications of 1, 2, 3, 4, 5 and 6
* Place the indicator plate of the mounted mirror unit's number in the indicator plate
pocket with the corresponding number.
Mirror unit indicator plate pocket*
Indicator plate
Downloaded from ManualsNet.com search engine
To Next Page
Loading...