Olympus LS-10 User Manual

Power Supplv
When the recorder is not being used, turn the
power
off to reduce battery consumption to a
minimum. Even if the power
is turned off, existing
data, mode settings, and clock settings will be
maintained.
o
o
Turning On Ihe Power:
While the recorder's power is off, slide
the POWER/HOLD switch
in the direction
indicated
by the arrow.
The display will turn on, and the power will be
turned on.
The resume function will bring the recorder
back to the stop position
in memory before
power was turned off.
When the
batteries are removed from the
recorder the resume function's stopped position
will be erased.
Turning OfIlhe Power:
Slide the POWER/HOLD switch in the
direction indicated
by the arrow for 1
second or longer.
The display shuts off and the power will be
turned off.
The resume
function remembers the stop
position before the power
is turned off
Power save mode IAulO Power om
If the recorder is stopped/not used for over 10
minutes (initial setting) while the power is turned
on, the power will be turned
off (oE P.34, P.40).
• If any button is pressed prior to the battery
turning off, the elapsed time count will start
over again until this function takes effect.
HOLD
If you bring the POWER/HOLD switch to the
[HOLD] position, the current conditions will be
preserved, and all buttons will be disabled. This
feature is useful when the recorder has to be
carried
in a bag or pocket.
Sellhe recorder 10 HOLD mode
Slide the POWER/HOLD switch to the
[HOLD] position.
After [Hold] appears on the display, the
recorder
is set to HOLD mode.
t1
I
-
0
...
0
0
0
0
"
:;.:
l-7C
i.~
t
v
Exil HOLD mode
Slide the POWER/HOLD switch to the ®
position.
II
III
CD
=
:ii'
=
ut
-
l»
::
CD
t::L
11

Olympus LS-10 Specifications

General

Brand	Olympus
Model	LS-10
Category	Voice Recorder
Language	English