II
c:
OIl
:ii'
11:I
-
='
CD
::II
CD
co
o
..
I:L
CD
..
o
=
~
=
..
...
n
48
[Connect
(Storage)]
is
appeared on
recorder if the USB
cable is connected
Connect.
(~:tor8~
e)
Be sure to use the attached dedicated cable
for the USB
connection
cable. If any
other
company's cable is used, it cause problems.
Also, please do not
connect
this dedicated
cable
to
any other company's product.
Disconnecting
from
Your
PC
Windows
1Click [
\$
] on the task bar located at
the lower-right corner of the screen.
Click
[Safely
Remove
Hardware].
• The drive letter will differ depending on the
PC being used.
2When the safe to remove hardware
window appears, click [OK].
3
Disconnect
the
USB
connection
cable.
Macintosh
Move
the drive
icon
for
this
recorder that
is
appear
on
the desktop
to
the garbage
bin
by
Drag & Drop
it.
When you connect the recorder to a Mac
OS, it will
be
recognized by the drive name
[LS_10] on the desktop. When an
SO
card
is
inserted it will be recognized by the drive
name
[Untitled].
:2
Disconnect the USB cable.
mmI
NEVER disconnect the USB while the
[PEAK]
indicator light
is
flashing. If you do, the data will
be destroyed.
When the recorder
is
connected to a PC, the
power will be supplied from the
USB
cable.
Refer to the user's manual for your PC regard-
ing the USB port on your PC.
Be sure that you connect the USB cable either
directly to the USB port on your PC.
Be sure
to
push the cable connector all the way
in. Otherwise, the recorder may not operate
properly.
When connecting the recorder through
an
USB
hub the operation may become unstable.
In
such cases, refrain from using a USB hub.
To Next Page
Loading...
