II
•
='
..
=
-
=aI
CD
"
..
..
I:L
5'
=
26
Recordinl
the
Sound
01
Other
Devices
with
This
Recorder:
The sound can be recorded when connecting to
the audio output terminal (earphone jack)
of
the
other device, and the
LINE IN
jack
of
the recorder
with the connecting cord KA334 (included within)
for dubbing.
• If you are unable to produce a clear recording
with this
recorder
even
after
adjusting
the
recording level
(trW
P.20), this could potentially
be because the output level for the connected
devices is too high
or
too low. When external
devices are connected, perform a test record-
ing and then adjust the output level
for
the
external devices.
• Do not connect the connecting cord to the MIC
jack when recording sound from other device
with this recorder.
Recordinl
the
Sound
01
This
Recorder
with
Other
Devices:
The sound
of
this recorder can be recorded to
other devices when connected to the audio input
terminal (line jack)
of
other devices and the
EAR
jack
of
this recorder, with the connecting cord
KA334
(included within) for dubbing.
• When you adjust the various
sound
quality
settings related to playback on the recorder,
the audio output signal sent out from the
EAR
jack
will change as well
(trW
P.34, P.38).
• In
case
of
recording on other
devices
without
a line input, the input may be too
large
to
con-
trol when the audio is input to the
microphone
jack.
In
this case, use the connecting cord
KA333 (optional) with attenuation
resistance
(trW
P.65).
To Next Page
Loading...
