EasyManua.ls Logo

Olympus LS-10 - Notes on Erasing

Olympus LS-10
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The display changes to
[All
Erase!] and
erasing will start. [Erase Done]
is
displayed
when the files are erased.
An erased file cannot be restored. When
an
SO
Card is inserted
in
the recorder, be sure to
confirm the recording media
as
either
[Built-
in
Memory]
or [SD Card] so that there is no
mistake
(",,'
P.34, P.39).
When attempting to perform operations such
as
rewriting the contents of
an
SO
Card
in
cases
where the card has been write protected, [SD
Card Locked] will appear. The playback opera-
tion can be performed, but the write protection
must first be turned
off
when overwriting the
contents
on
the card (
...
P.15)
.
The locked files and files set as read-only
cannot be erased
(""
P.34, PAD).
If
an
action
is
not selected within eight seconds
on
the [Cancel], [Erase] or [All Erase] screens,
the recorder will return to stop status.
Never perform operations such
as
the following
while processing, as they may damage the
data.
In
addition, replace the batteries with two
new ones
in
order to ensure that the batteries
will not run out while processing.
CD
Turning
off
the power while processing.
® Removing the batteries while processing.
@Remove
the
SO
Card during processing
when [SD Card]
is
being used
as
the record-
ing media.
Performing any
of
these operations may dam-
age the data.
You cannot delete folders through the re-
corder.
Era~e
(lone
9
fOGO
o
:mS::'s
All
Era:
•.
r:J
10%
3
Press
the.
button
to
select
[All
Erase).
.4
Press
the
~/OK
button.
r=======
33

Other manuals for Olympus LS-10

Related product manuals