Olympus LS-10 - Menu Reset

• Others (Continued)
• Select the files for which you would like to confirm information in advance before
operating the menu.
You can check the recorder's information on the menu screen. [Model Name], [Version]
and [Serial
Number] appears on the display.
This returns the functions back to their initial settings (factory default).
Setting:
[Start): Returns the settings to their initial values.
[Cancel): Takes you back to the [Others).
:.
CD
=
=
en
CD
a
=
=
..
[10 minutes)
[Off)
[Built-in Memory]
[File]
[Normal]
[Normal)
Each time the Fn button is pressed, the setting of registered function is changed:
[light]: [On) [Off): Select backlight on or off by pressing the Fn
button.
• When the registered function
is [Rec Mode], [MemorySelect], or [Property], these
will not function if the
Fn button is pressed during recording or playback. While the
recorder
is during stop mode, press the Fn button.
• After resetting the settings, the time settings and file numbers will be preserved from
before the reset and will not return
to their initial settings.
Menu
settings after setting reset (initial settings) .
• Ree
Menu • LCD/Sound Menu
[Rec Mode) [Backlight) [10 seconds)
Recording format [PCM) [Contrast) [06]
Recording rate [44.1kHz/16bit) [LED) [On)
[Rec Level) •
Memory Menu
Recording level [Manual) [MemorySelect]
Limiter function [limiter On)
[Zoom Mic) [Off] • Others
[Rec Monitor) [On] [AutoPowerOff)
[Plug-inPower) [On] [Fn Setting]
• Play Menu
[Play Mode]
[Reverb]
[EUPHONY)
File and folder information can
be confirmed from the menu screen.
When the file is selected: [Name) [Date] [Size] [Length] and [File Format]
will appear on the display.
When
the folder is selected: [Name] and [Date] will appear on the display.
41