Olympus OM-1 - Page 80

D-14
10) Remove adhesive, adhering CA8946 String with CA89 49 (Plate),
to separate them from each other.
Then wUl come off:
CA8879 (Ring)
CA8938 (Spring)
XCA8957 a - c (Roller) a - c
XCA8933 a - f (Roller) a - f
CA8946 and CA8944 are to be connected as follows.
11) Remove PUK1.4 x 1.8SO and three PUK1.4 x 1.8SO on CA8882
(Plate).
With care not to damage CA8914 (Damper) and CA8915 (Damper),
remove CA8882.
http://olvmpus.dement
nvare